- About the Normal Distribution
- Excel Functions for the Normal Distribution
- Confidence Intervals and the Normal Distribution
- The Central Limit Theorem

**Page 1**of 4 Next >

## About the Normal Distribution

You cannot go through life without encountering the normal distribution, or "bell curve," on an almost daily basis. It's the foundation for grading "on the curve" when you were in elementary and high school. The height and weight of people in your family, in your neighborhood, in your country each follow a normal curve. The number of times a fair coin comes up heads in ten flips follows a normal curve. The title of a contentious and controversial book published in the 1990s. Even that ridiculously abbreviated list is remarkable for a phenomenon that was only starting to be perceived 300 years ago.

The normal distribution occupies a special niche in the theory of statistics and probability, and that's a principal reason Excel offers more worksheet functions that pertain to the normal distribution than to any other, such as the t, the binomial, the Poisson, and so on. Another reason Excel pays so much attention to the normal distribution is that so many variables that interest researchers—in addition to the few just mentioned—follow a normal distribution.

### Characteristics of the Normal Distribution

There isn't just one normal distribution, but an infinite number. Despite the fact that there are so many of them, you never encounter one in nature.

Those are not contradictory statements. There is a normal curve—or, if you prefer, normal distribution or bell curve or Gaussian curve—for every number, because the normal curve can have any mean and any standard deviation. A normal curve can have a mean of 100 and a standard deviation of 16, or a mean of 54.3 and a standard deviation of 10. It all depends on the variable you're measuring.

The reason you never see a normal distribution in nature is that nature is messy. You see a huge number of variables whose distributions follow a normal distribution very closely. But the normal distribution is the result of an equation, and can therefore be drawn precisely. If you attempt to emulate a normal curve by charting the number of people whose height is 56", all those whose height is 57", and so on, you will start seeing a distribution that resembles a normal curve when you get to somewhere around 30 people.

As your sample gets into the hundreds, you'll find that the frequency distribution looks pretty normal—not quite, but nearly. As you get into the thousands you'll find your frequency distribution is not visually distinguishable from a normal curve. But if you apply the functions for skewness and kurtosis discussed in this chapter, you'll find that your curve just misses being perfectly normal. You have tiny amounts of sampling error to contend with, for one; for another, your measures won't be perfectly accurate.

#### Skewness

A normal distribution is not skewed to the left or the right but is symmetric. A skewed distribution has values whose frequencies bunch up in one tail and stretch out in the other tail.

#### Skewness and Standard Deviations

The asymmetry in a skewed distribution causes the meaning of a standard deviation to differ from its meaning in a symmetric distribution, such as the normal curve or the t-distribution (see Chapters 8 and 9, for information on the t-distribution). In a symmetric distribution such as the normal, close to 34% of the area under the curve falls between the mean and one standard deviation below the mean. Because the distribution is symmetric, an additional 34% of the area also falls between the mean and one standard deviation above the mean.

But the asymmetry in a skewed distribution causes the equal percentages in a symmetric distribution to become unequal. For example, in a distribution that skews right you might find 45% of the area under the curve between the mean and one standard deviation below the mean; another 25% might be between the mean and one standard deviation above it.

In that case, you still have about 68% of the area under the curve between one standard deviation below and one standard deviation above the mean. But that 68% is split so that its bulk is primarily below the mean.

#### Visualizing Skewed Distributions

Figure 7.1 shows several distributions with different degrees of skewness.

Figure 7.1 A curve is said to be skewed in the direction that it tails off: The log X curve is "skewed left" or "skewed negative."

The normal curve shown in Figure 7.1 (based on a random sample of 5,000 numbers, generated by Excel's Data Analysis add-in) is not the idealized normal curve but a close approximation. Its skewness, calculated by Excel's SKEW() function, is -0.02. That's very close to zero; a purely normal curve has a skewness of exactly 0.

The X^{2} and log X curves in Figure 7.1 are based on the same X values as form the figure's normal distribution. The X^{2} curve tails to the right and skews positively at 0.57. The log X curve tails to the left and skews negatively at -0.74. It's generally true that a negative skewness measure indicates a distribution that tails off left, and a positive skewness measure tails off right.

The F curve in Figure 7.1 is based on a true F-distribution with 4 and 100 degrees of freedom. (This book has much more to say about F-distributions beginning in Chapter 10, "Testing Differences Between Means: The Analysis of Variance." An F-distribution is based on the ratio of two variances, each of which has a particular number of degrees of freedom.) F-distributions always skew right. It is included here so that you can compare it with another important distribution, t, which appears in the next section on a curve's kurtosis.

#### Quantifying Skewness

Several methods are used to calculate the skewness of a set of numbers. Although the values they return are close to one another, no two methods yield exactly the same result. Unfortunately, no real consensus has formed on one method. I mention most of them here so that you'll be aware of the lack of consensus. More researchers report some measure of skewness than was once the case, to help the consumers of that research better understand the nature of the data under study. It's much more effective to report a measure of skewness than to print a chart in a journal and expect the reader to decide how far the distribution departs from the normal. That departure can affect everything from the meaning of correlation coefficients to whether inferential tests have any meaning with the data in question.

For example, one measure of skewness proposed by Karl Pearson (of the Pearson correlation coefficient) is shown here:

- Skewness = (Mean - Mode) / Standard Deviation

But it's more typical to use the sum of the cubed z-scores in the distribution to calculate its skewness. One such method calculates skewness as follows:

This is simply the average cubed z-score.

Excel uses a variation of that formula in its SKEW() function:

A little thought will show that the Excel function always returns a larger value than the simple average of the cubed z-scores. If the number of values in the distribution is large, the two approaches are nearly equivalent. But for a sample of only five values, Excel's SKEW() function can easily return a value half again as large as the average cubed z-score. See Figure 7.2, where the original values in Column A are simply replicated (twice) in Column E. Notice that the value returned by SKEW() depends on the number of values it evaluates.

Figure 7.2 The mean cubed z-score is not affected by the number of values in the distribution.

#### Kurtosis

A distribution might be symmetric but still depart from the normal pattern by being taller or flatter than the true normal curve. This quality is called a curve's *kurtosis*.

#### Types of Kurtosis

Several adjectives that further describe the nature of a curve's kurtosis appear almost exclusively in statistics textbooks:

- A
*platykurtic*curve is flatter and broader than a normal curve. (A platypus is so named because of its broad foot.) - A
*mesokurtic*curve occupies a middle ground as to its kurtosis. A normal curve is mesokurtic. - A
*leptokurtic*curve is more peaked than a normal curve: Its central area is more slender. This forces more of the curve's area into the tails. Or you can think of it as thicker tails pulling more of the curve's area out of the middle.

The t-distribution (see Chapter 8) is leptokurtic, but the more observations in a sample the more closely the t-distribution resembles the normal curve. Because there is more area in the tails of a t-distribution, special comparisons are needed to use the t-distribution as a way to test the mean of a relatively small sample. Again, Chapters 8 and 9 explore this issue in some detail, but you'll find that the leptokurtic t-distribution also has applications in regression analysis (see Chapter 12).

Figure 7.3 shows a normal curve—at any rate, one with a very small amount of kurtosis, -0.03. It also shows a somewhat leptokurtic curve, with kurtosis equal to -0.80.

Figure 7.3 Observations toward the middle of the normal curve move toward the tails in a leptokurtic curve.

Notice that more of the area under the leptokurtic curve is in the tails of the distribution, with less occupying the middle. The t-distribution follows this pattern, and tests of such statistics as means take account of this when, for example, the population standard deviation is unknown and the sample size is small. With more of the area in the tails of the distribution, the critical values needed to reject a null hypothesis are larger than when the distribution is normal. The effect also finds its way into the construction of confidence intervals (discussed later in this chapter).

#### Quantifying Kurtosis

The rationale to quantify kurtosis is the same as the rationale to quantify skewness: A number is often a more efficient descriptor than a chart. Furthermore, knowing how far a distribution departs from the normal helps the consumer of the research put other reported findings in context.

Excel offers the KURT() worksheet function to calculate the kurtosis in a set of numbers. Unfortunately there is no more consensus regarding a formula for kurtosis than there is for skewness. But the recommended formulas do tend to agree on using some variation on the z-scores raised to the fourth power.

Here's one textbook definition of kurtosis:

In this definition, N is the number of values in the distribution and z represents the associated z-scores: that is, each value less the mean, divided by the standard deviation.

The number 3 is subtracted to set the result equal to 0 for the normal curve. Then, positive values for the kurtosis indicate a leptokurtic distribution whereas negative values indicate a platykurtic distribution. Because the z-scores are raised to an even power, their sum (and therefore their mean) cannot be negative. Subtracting 3 is a convenient way to give platykurtic curves a negative kurtosis. Some versions of the formula do not subtract 3. Those versions would return the value 3 for a normal curve.

Excel's KURT() function is calculated in this fashion, following an approach that's intended to correct bias in the sample's estimation of the population parameter:

### The Unit Normal Distribution

One particular version of the normal distribution has special importance. It's called the *unit normal* or *standard normal* distribution. Its shape is the same as any normal distribution but its mean is 0 and its standard deviation is 1. That location (the mean of 0) and spread (the standard deviation of 1) makes it a standard, and that's handy.

Because of those two characteristics, you immediately know the cumulative area below any value. In the unit normal distribution, the value 1 is one standard deviation above the mean of 0, and so 84% of the area falls to its left. The value -2 is two standard deviations below the mean of 0, and so 2.275% of the area falls to its left.

On the other hand, suppose that you were working with a distribution that has a mean of 7.63 centimeters and a standard deviation of .124 centimeters—perhaps that represents the diameter of a machine part whose size must be precise. If someone told you that one of the machine parts has a diameter of 7.816, you'd probably have to think for a moment before you realized that's one-and-one-half standard deviations above the mean. But if you're using the unit normal distribution as a yardstick, hearing of a score of 1.5 tells you exactly where that machine part is in the distribution.

So it's quicker and easier to interpret the meaning of a value if you use the unit normal distribution as your framework. Excel has worksheet functions tailored for the normal distribution, and they are easy to use. Excel also has worksheet functions tailored specifically for the unit normal distribution, and they are even easier to use: You don't need to supply the distribution's mean and standard deviation, because they're known. The next section discusses those functions, for both Excel 2010 and earlier versions.

**Page 1**of 4 Next >